Sheet Cutting Machine

Our Range of Products:

Sheet Cutting Machine

Sheet Cutting Machine
Model No. HR SC 206

To cut Paper / Board from Reel to Sheet, Hydrulic floor lifting Shaftless Reel Stands with Web Guiding, Auto Tension Pneumatic Brake, De-curling unit, Slitting unit, Heavy duty Cutter, Duplex Conveyor with Over lapping unit, Motorized delivery table with auto lowered, Sheet Size set by Touch Screen with Servo Motor. To see VIDEO Click the Link http://www.youtube.com/watch?v=Hw3Vjq1uqrY

Technical Specification
Working Width 48" (1220 mm) (Also available in 54" / 60")
Floor Space 48” With One Reel Stand 32 ft x 7 ft
Designed Working Speed 110 Mts. Per/ min (Approx 125 Stroke Per/min Depending on cutting length)
Max Unwind dia 54" (1370 mm) / 60" (1500 mm)
Max. Stacking height 40" (1000 mm) / 47" (1200 mm)
Cutting Length Min 14" (350 mm) Max 40" (1000)/54"(1370 mm)
Type of material Paper from 70 gsm to 450 gsm (Total of all paper)
Total Power Required 12 HP
Sheet length adjustment Touch Screen with Servo Motor
De-curling unit Motorized De- curling unit

  

SIMPLEX ROTARY SHEET CUTTING MACHINE
Model No. HR SC 201

To cut paper from reel to sheet, multiple reel stands available, delivery table is auto lowered through motor.

Technical Specification
Working Width 40" (1000 mm) (Also available from 30" to 60") with One - Reel Stand
Floor Space 40” With One Reel Stand 21 ft. x 7 ft with Four Reels Stands 34 ft. x 7 ft.
Working Speed 85 Mts. Per/ min (Approx 90 Stroke Per/min) Depending on cutting length
Max Unwind dia 40" (1000 mm) / 54" / 60" (1500 mm)
Max. Stacking height 36" (915 mm) / 42" / 47" (1200 mm)
Cutting Length 12" (300 mm) (Min) 48" (1220 mm) (Max)
Type of material Paper from 50 gsm to 450 gsm (Total of all paper)
Power Required 5 HP (up to 2 Reel Stand) 7.5 HP (up to 4 reel stand)
Sheet length adjustment Gear / Servo Motor / Variable gearbox or any two as required.
Optional Side trimming / Center cut / Auto Tension Brake / Web Guiding / Shaft Less Unwind Unit.


Simplex Rotary Sheet Cutting Machine
Model No. HR SC 202

To cut paper from reel to sheet, Multiple Reel Stands is also available. Delivery Table is lower through hand wheel. To see Video Click this Link http://www.youtube.com/watch?v=EfHwpwl00CU&feature=youtu.be

Technical Specifications
Working Width 40" (1000 mm) (also available from 20" to 60")
Floor Space 40" With One-Real Stand 15 ft x7 ft (with 4 Reel Stand 28 ft x 7ft )
Working Speed 70 Mts Per/min (Approx 80 Stroke Per/min) Depending on cutting length
Max. Unwind dia 40" (1000 mm) 54" / 60" (1500 mm)
Max Stacking height 28" (710 mm)/ 36" (900 mm)
Min & Max Cutting Length 12" (300 mm) (Min) 40" (1000 mm)(Max)
Type of material Paper from 45 gsm to 350 gsm (Total of all Paper)
Power Required 3HP (up to 2 Reel Stand) 5 HP (up to 4 reel stand)
Sheet Length Adjustment Gear / Servo Motor / Variable gearbox
Optional Side trimming / Center cut / Auto Tension Brake / Web Guiding /Shaft Less Unwind Unit / Flexographic Printing unit


Simplex Rotary Sheet Cutting Machine
Model No. HR SC 203

To cut paper from Reel to Sheet, Multiple Reel Stands is also available. Fix delivery table is provided. To see Video click this link http://www.youtube.com/watch?v=iDW47UVe2vA

Technical Specifications
Working Width 40” (1000 mm) (Also available in 20" to 60")
Floor Space 40" (1000mm) 9 ft. x 7 ft.
Working Speed 60 mts. (Approx 70) Stroke Per/min Depending on Cutting Length
Unwind dia 40" (1000 mm)
Cutting Length 12" (300 mm) (Min) 40" (1000 mm)(Max)
Type of material Paper from 40 gsm to 200 gsm (Total of all Paper)
Power Required 2HP 440V 50Hz
Sheet length Adjustment Gear or Variable gearbox or both as required
Optional Side trimming / Center cut / Auto Tension Brake / Web Guiding / Shaft Less Unwind Unit


Simplex Rotary Sheet Cutting Machine
Model No. HR SC 205

To cut paper from reel to sheet in A4/ A3 Cut Size, delivery table is lowered through mechanical drive. Duplex conveyor is provided for proper stacking at high speed. The machine can be also attached in front of any web offset, etc-printing machine. To see Video click this link http://youtu.be/GjGaaErNdxU

Technical Specifications
Working Width 18" (460 mm) (Also available in 26")
Floor Space 18" 9.5 ft. x 4.5 ft.
Working Speed 200 Cuts Per/ min (Depending on Length )
Maximum Cutting Length 12" (300 mm)
Minimum Cutting Length 3" (76 mm)
Maxi Unwind Roll Dia 40" (1000 mm)
Type of material Paper from 36 gsm to 150 gsm
Sheet length adjustment Gear type
Power Required 2 HP 440V 50Hz
Optional Side trimming Auto Tension Brake, Web Guiding


Paper Reel to Sheet Cutting Machine
Model No. HR SC 207

To cut Paper / Board / Label Stock from Reel to Sheet, Hydraulic floor lifting Shaftless Reel Stands with Web Guiding, Auto Tension Pneumatic Brake, De-curling unit, Slitting unit with Pneumatic Cutters, Heavy duty Cutter, Duplex Conveyor with Over lapping unit, PLC based Control with Inter-Locking Systems & Safety Features for easy running, Sheet Ejector unit, Air Purging & Section Pump Systems, Motorized delivery table with auto lowered, Sheet Size set by Touch Screen with Servo Motor. To see Video Click http://www.youtube.com/watch?v=MmyUVIA6XHY

Technical Specifications
Working Width 48" (1220 mm) (Also available in 54" / 62")
Floor Space" 62" Width with Shaftless Reel Stand 33 ft x 13 ft
Designed Working Speed 150 Mts. Per/ min (Approx 125 Stroke Per/min Depending on cutting length)
Max Unwind dia 40" (1000 mm) / 54" (1370 mm) / 60" (1500 mm)
Max. Stacking height 32" (800 mm) / 40" (1000 mm) / 47" (1200 mm)
Cutting Length Min 12" (304 mm) Max 40" (1000) / 50" (1270 mm)
Type of material Paper from 70 gsm to 400 gsm (Total of all paper)
Total Power Required 24 HP 3 Phase (415V 50Hz)
Sheet length adjustment Touch Screen with Servo Motor
De-curling unit Motorized De-curling unit
Optional Tag Inserter


Cut to Register Mark Rotary Sheeter Machine
Model No. HR SC 208

Off line Cut to Registration, Cut to Mark Sheeter Available for Converters and Commercial Printers sheeting to a registration mark on a variety of preprinted materials. To Cut Plain and Printed Paper / Printed Labels from Reel to Sheet, Reel Stands with Web Guiding, Auto Tension Pneumatic Brake, De-curling unit, Slitting unit with Pneumatic Cutters, Heavy duty Cutter, Duplex Conveyor with Over lapping unit, Motorized delivery table with auto lowered, PLC based Control with Inter-Locking Systems & Safety Features for easy running, Eye Mark Sensor for Register Mark Cutting, Sheet Size set by Touch Screen with Servo Motor. To see video click this link http://www.youtube.com/watch?v=nAveflmCSbg

Technical Specifications
Working Width 20" (500 mm) (Also available in 30" (762 mm) to 62" (1575 mm)
Floor Space 20" (500 mm)" 14 ft x 6 ft
Designed Working Speed 100 Mts. Per/ min (Approx 250 Stroke of 85 mm Per/min)
Max Unwind dia 40" (1000 mm)
Max. Stacking height 18" (450 mm) / 32" (800 mm) / 40" (1000 mm)
Cutting Length Min 3.3" (85 mm) / 11.7" (297 mm) Max 8" (200 mm) / 40" (1000 mm)
Type of material Printed & Plane Paper / Labels from 60 gsm to 200 gsm
Total Power Required 12 HP 3 Phase (415V 50Hz)
Sheet length adjustment Touch Screen with Servo Motor
Optional Tag Inserter, Reel Loader


Cut to Length Machine

Model No. HR CTL 204

To cut paper from reel to sheet, the sheet size is digitally set through MMI, The puller unit is servo motor driven.To see video Click the below link http://www.youtube.com/watch?v=QRJosERbTfc

Specification of Model No. HR CTL 204 Cut to Length Machine
Working Width 30" (760 mm) (Also available from 18" to 60")
Floor Space 18” 11 ft x 6 ft
Working Speed 30 Mts Per/min (Approx 40 Stroke Per/min) Depending on cutting length
Max Unwind dia 40" (1000 mm)
Max. Stacking height 18" (460 mm)
Cutting Length 1.5" (38 mm) (Min) 40" (1000 mm) (Max) above 40” on request.
Type of material Paper from 36 gsm to 200 gsm
Power Required 4 HP
Sheet length adjustment Digital through MMI
Optional Side trimming / Center cut, Auto Tension Brake, Web Guiding & Photo Sensor.