Sheet Cutting Machine

Our Range of Products:

Flexographic Printing Machine

Flexographic Printing Machine
Model No. HR FP 501

Elegantly designed to print on HDPE, PP Woven Sack in Roll to Roll for Cement, Fertilizer, and Grains etc. Available in 1, 2 & 4 Colours. The Machine is equipped with Motorized Auto Tension Controls at Winding and Pneumatic Brake with Load cell for Auto Tension at Unwind, Pneumatic Loading of Unwind Roll, and Electronic Centralized Web guide. To see video Click the below link http://www.youtube.com/watch?v=km_du2HxAEs

Technical Specification
Working Width 48” (1220 mm) (Also available in 30")
Floor Space for 48” 20 ft. x 9 ft.
Designed Speed 100 Mts. Per/min
Max. Unwind dia 50" (1270 mm)
Max. Winding dia 50" (1270 mm)
Core ID at Unwinding 3” (76 mm) /4" (100mm) Paper core
Core ID at Winding 3” (76 mm) /4" (100mm) Paper core
Power required 25 HP
Optional Air Shaft, Auto tension at Winding & Unwind and Hydraulic Roll Lifting at Unwind, Web Guide

  

Flexographic Printing Machine
Model No. HR FP 502

Elegantly designed to print on low and high density- Polyethylene, Polyproplane, HM, HDPE, Aluminum Foil, Paper, ATM Rolls and other flexible packaging materials. (Available in 3, 4 & 6 Colours) To see video Click the below link http://www.youtube.com/watch?v=M0iY4u6w7k4

Technical Specification for 4 Colour
Working Width 24” (600 mm) (Also available from 16” to 42")
Floor Space 24" (600 mm) 17 ft x 6 ft x 8ft
Working Speed 60 meter (depending on materials & Colours)
Max. Unwind dia 36" (900 mm)
Max. Wind dia 36" (900 mm)
Core ID at Winding & Unwind 3" (76 mm) Paper core
Minimum Printing repeat 12" (304mm) / 15" (381 mm)
Maximum Printing Repeat 24" (610 mm) / 40" (1000mm)
Type of Materials Paper (45 to 150 gsm) Films (80 to 250 mic)
Power required 21 HP
Optional Web Guide, Auto tension at Unwind & Winding, Air Shaft


Flexographic Printing, Gusseting Cum Cutting Machine For Woven Bags
Model No. HR FG 503

Technical Specification
Working Width 32” (810 mm) (Also available in 27")
Floor Space 32” 33 ft. x 8 ft.
Designed Speed 80 Mts. (Approx. 90 Bags Per/min)
Max. Unwind dia 40" (1000 mm)
Min & Max Cutting Length 19"- 45" (480 -1144 mm)
Gusset Width 0-3" x 2"
Power required 30 HP
Core ID at Unwinding 3” (76 mm) Paper core
Optional Auto tension and Hydraulic Roll Lifting at Unwind


Slitting Rewinding
cum Flexo Printing machine in 2 Colour
Model No. HR SR-F 102

Elegantly designed to print on low and high density-polyethylene, polypro plane, aluminum foil, paper and other flexible packaging materials
http://youtu.be/BAD7fhirV9k   To see Video click this Link 

Technical Specification
Working Width 40” (1000 mm) (Also available from 20” to 42")
Floor Space 40” (1000 mm) 9 ft. x 9 ft.
Working Speed 90 meter (depending on materials)
Max. Unwind dia 36" (900 mm)
Max. Winding Dia 24” (600 mm)
Core ID at winding & Unwind 3” (76 mm) Paper core
Minimum Slit 30 mm (depending on different materials)
Type of Materials Paper (60 to 200 gsm) Films (80 to 250 mic)
Power required 17 HP (2 Colour)
Optional Web Guide, Auto tension at Unwind & Winding


Slitting & Rewinding Machine with 2 colour Flexographic Printing attachment
Model No. HR SR-F107

Elegantly designed to print on paper and other flexible packaging materials. Slitting unit for making 2 or 3 Ply adding machine rolls, duplex center shaft winder to make fax rolls from bigger width to smaller widths. To see Video Click the below link. http://www.youtube.com/watch?v=QyeDVpkBaaE

Technical Specification
Web Width 12" (300 mm) (Also available up to 30”)
Floor Space 12" (300 mm) 8 ft. x 5 ft.
Working Speed 80 meter (depending on materials)
Max. Unwinding Dia 18” (457 mm)
Max. Winding Dia Printing 18” (457 mm) Adding Rolls 4" (100 mm)
Core ID at Unwinding 3” (76 mm) Paper core
Core ID at Winding ½” , 1” , 3”
Minimum Slit 30 mm (depending on different materials)
Type of Materials Paper (40 to 120 gsm) Films (60 to 150 mic)
Number of colours 1, 2 Colours
Power required 2 HP
Optional Web Guide, Auto tension at Unwind & Winding