Sheet Cutting Machine

Our Range of Products:

Other Machine

Embossing Machine
Model No. HR E 407

Technical Specification
Working Width 40” (1000 mm) Also available 48” to 60”
Floor Space 40” (1000 mm) 7 ft. x 8 ft
Working Speed 50 Mts. Per/Min. (depending on material)
Max. Unwind dia 36" (915 mm)
Max. Winding dia 6" (150 mm) / 10” (250 mm)
Core ID at Unwinding 3” (76 mm)
Core ID at Winding 3” (76 mm) / 2” (50 mm)/ 1.5” Paper core
Type of material Paper & Films
Power required 3 HP
Optional Auto tension at Unwind, Winder & Web Guide

  

Cutting & Punching Machine for HDPE Jumbo Container Bags
Model No. HR CP 505

To cut required length and Punch Hole in the Center of the Fabric Length. To see video Click the below link http://www.youtube.com/watch?v=fqwXuLHoxcw

Technical Specification
Working Width 48” Also available 48" (1200 mm) to 80" (2000mm)
Floor Space 48” (1200 mm) 10 ft. x 8 ft
Working Speed 20 Mts. Per/Min. (depending on different Length)
Unwind dia 40" (1000 mm)
Type of material HDPE
Core ID at Unwinding 3” (76 mm)
Min - Max Center Hole 15" (380 mm) - 22" (500 mm) or as per requirement
Power required 30 HP
Optional Auto tension at Unwind, Web Guiding


Scrap Baling Machine
Model No. HR SB 506

Technical Specification
Working Width 48" (1220 mm) Also available 30" / 52
Floor Space 40” (1000 mm) 10 ft. x 4 ft.
Max Block 20” x 20” / 30” x 18”
Type of material Paper / Aluminum
Power Require 5 HP
Optional Top door Hydraulic opening


Shaftless Unwind


Shaft Less Unwind Unit with Floor Lifting
Model No. HR FLS 306

Shaft less hydraulic Reel lifting from the floor with Web Guide Unit, for quick change over of Paper Rolls and save down time. To see Video click. http://www.youtube.com/watch?v=8MyK2eZUpcM

Technical Specification
Working Width 60” (1500 mm) Also available from 48" to 110""
Floor Space 60” (1500 mm) 10 ft. x 4 ft.
Max Unwind dia 40" (1000 mm) / 54" / 60" (1500 mm)
Core ID at Unwinding 3” (76 mm) / 4” (100 mm) 6” (150mm) Paper core
Power for Hydraulic Pump 3 HP
Optional Manual or Auto tension Pneumatic Brake


Hydraulic Shaftless Reel Stand
Model No. HR FLS 307

Shaft less hydraulic Reel lifting from the floor with Web Guide Unit, bearing mounted Mechanical Expandable Torque Chucks, Pneumatic Brake with Load Cell & Auto Tension is provided. This unit helps in for a quick change over of Paper Rolls and saves the down time in handling heavy rolls. Interlocks are provided for safety.

Technical Specification
Working Width 60" (1500 mm) Also available till 110" ( 2794 mm)
Floor Space 60" (1500 mm) 13 ft. x 6 ft.
Max Unwind dia 40" (1000 mm) / 54" / 60" (1500 mm)
Core ID at Unwinding 3" (76 mm) / 4" (100 mm) / 6" (150 mm) Paper core / Metal Core
Power for Hydraulic Pump 2 HP / 3 HP
Optional Synchronizing & Interlocks with main Machine, Web Break Sensor


Shaft Less Unwind Unit
Model No. HR SL 302

Shaft less Unwind Stand for quick change over of reel and saves down time.

Technical Specification
Working Width 60” (1500 mm) Also available from 48" to 110"
Floor Space 60” (1500 mm) 10 ft. x 4 ft.
Max Unwind dia 40" (1000 mm) / 54" / 60" (1500 mm)
Core ID at Unwinding 3” (76 mm) / 4” (100 mm) 6” (150mm) Paper core
Optional Auto tension Brake, Web Guiding & Reel floor lifting


Paper Core Cutting


Core Cutting
Model No. HR CC 301 Machine

To cut long paper core to required length. Available in manual and pneumatic cutting systems. To see video Click the below link http://www.youtube.com/watch?v=2lrUiq0aO4I

Technical Specification
Web Width 40” (1000 mm) Also available (15" to 60")
Floor Space 40” (1000 mm) 5.5 ft. x 2.5 ft.
Type of Materials Paper & Board core.
Core ID 3” (76 mm) Paper core
Power 1 HP
Minimum cutting 20 mm (depending on different materials)
Optional Pneumatic cutting & Core ID 2"


Paper Core Cutting Machine
Model No. HR CC 304

The machine Pneumatically cut long paper core to required length. One's the operate button is pressed the Cutter automatically comes down, cuts the core and goes up. Ejecting of core is optional. http://youtu.be/6EaCs12_iHE

Technical Specification
Web Width 40” (1000 mm) Also available (15" to 60")
Floor Space 40” (1000 mm) 5.5 ft. x 2.5 ft.
Type of Materials Paper & Board core.
Paper Core ID 3” (76 mm) / 4" (100 mm)/ 6" (150 mm) Paper core
Power 2 HP 3 Phase (440V 50Hz)
Minimum cutting 20 mm (depending on different materials)
Maximum Core Thickness 8 mm / 15 mm


Programmable Paper Core Cutting Machine
Model No. HR CC 306

HR-CC-306 Paper Core Cutting Machine is designed for reaching high speed production capacity, easy to use more safely and to reduce mush wastage of Core. PLC Programmable with Screen panel for easy operating. The machine's cutting system is controlled by stepper motor so the machine can able to cut precisely as per the size feeded in the program. To see Video click this link https://www.youtube.com/watch?v=GXksbvSuAt0

Technical Specification
Web Width available 40" (1000 mm) to 80"
Floor Space 40" (1000 mm) 6 ft. x 3 ft. x 5.5 ft.
Type of Materials Paper & Board core.
Core ID Range 2" (5.8 mm) / 3" (76 mm) / 4" (101.6 mm)/ 6" (152 mm)
Maximum Core Thickness 4 mm to 15 mm
Minimum cutting 20 mm (depending on core thickness)
Cutting Accuracy +- 0.5 mm
Power 2 HP 3 Phase (415V 50Hz)
Optional Servo Motor for longer core length / Different Core ID


Automatic Paper Core Cutting Machine
Model No. HR CC 305

The machine Pneumatically cut's long paper core to required length. One's the operate button is pressed the Cutter automatically comes down, cuts the core and goes up. The cutted core's are ejected pneumatically. The Blades have Spacers to get correct cutting length. You can load 12 to 15 cutter and have more production. You can have 1" to 3" ID core cutting through different Mandrels. To see Video click this Link https://www.youtube.com/watch?v=FkfzKDPZZI0

Technical Specification
Web Width 20” (500 mm)
Floor Space 20” (500 mm) 5.5 ft. x 2.5 ft. x 4ft
Type of Materials Paper & Board core.
Core ID 1" (25.4 mm) / 40 mm / 3” (76 mm) Paper core
Maximum Core Thickness 6 mm
Minimum cutting 20 mm (depending on different materials)
Power 2 HP 3 Phase (415V 50Hz)
Optional Different Mandrels


Cam Punch Machine


Model No. HR CP 507

CAD / CAM Under lay Paper for garment Industries. This machines makes hole of 6 mm at a distance of 2" x 2" in paper and make batch rolls as length required. To see Video Click this link http://www.youtube.com/watch?v=pVct-KSBKVA

Technical Specification
Working Width 80” (2000 mm) (Also available in 60” /72")
Floor Space 80" (2000 mm) 11 ft. x 12 ft.
Designed Speed Variable upto 150 mtrs Per/ min.
Max. Unwind dia 40" (1000 mm)
Max. Winding dia 10" (250 mm)
Core ID at winding & Unwind 3” (76 mm) Paper core
Type of material Paper (80 to 150 gsm)
Power Required 7.5 HP
Optional Shaft less Unwind, Air Shaft at winding, Auto Tension Brake, Web Guide